Support Bulletin 2030: 2030 Rev: A

Abstract: This document contains configurations for using Attachmate's Extra for Windows and Attachmate's Extra for DOS as tested by Attachmate. Configurations for using the three Attachmate connections (IPX, DLC, and Netbios) are shown below.

The testing was done with a Racore M8119 and Attachmate for Windows versions 3.40 and 3.50. However, the configurations are the same for all versions of Attachmate Extra and all models of Racore's 16/4 Mbps Token Ring Adapters.

For additional information, consult the LAN Support Supplement to the "Creating a DOS ODI Workstation" document (#3020) and the Attachmate Extra Setup and Customization manual.

The required files can be obtained from the following vendors:

Filename           Vendor

RINTARB.SYS       Racore (Distribution Diskette)
RTR16ASI.SYS      Racore (Distribution Diskette)
DXMA0MOD.SYS   IBM (LAN Support Program)
DXMT0MOD.SYS    IBM (LAN Support Program)
LSL.COM               Novell (Netware WSGEN Diskette)
LANSUP.COM        Novell (Netware WSGEN Diskette)
IPXODI.COM           Novell (Netware WSGEN Diskette)
NETX.EXE              Novell (Netware WSGEN Diskette)

IPX Connection:

CONFIG.SYS
Device=RINTARB.SYS
Device=RTR16ASI.SYS
or
Device=DXMA0MOD.SYS
Device=RTR16ASI.SYS
AUTOEXEC.BAT (Required for IPX Connection)
LSL.COM
LANSUP.COM
IPXODI.COM
NETX.EXE

DLC Connection:

CONFIG.SYS
Device=RINTARB.SYS
Device=RTR16ASI.SYS

or

Device=DXMA0MOD.SYS
Device=RTR16ASI.SYS
AUTOEXEC.BAT (Optional - For Netware Connectivity Only)

LSL.COM
LANSUP.COM
IPXODI.COM
NETX.EXE

Netbios Connection:

CONFIG.SYS
Device=RINTARB.SYS
Device=RTR16ASI.SYS
Device=DXMA0MOD.SYS S=20 C=20 ST=20 ES=2 EST=2

or

Device=DXMA0MOD.SYS
Device=RTR16ASI.SYS
Device=DXMA0MOD.SYS S=20 C=20 ST=20 ES=2 EST=2

AUTOEXEC.BAT (Optional - For Netware Connectivity Only)
LSL.COM
LANSUP.COM
IPXODI.COM
NETX.EXE